FLAGSHIP PATH
MOST COMMON CONVERSION ENQUIRY
Old tiles to a new steel roof
Replace an ageing tiled system with a new profiled-steel roof, with the framing, battens, sarking, flashings and drainage assessed for the property.
PERTH RE-ROOFING & ROOF REPLACEMENT
Re-Roofing Perth: Replace the failing roof — not just the visible problem
Roof Cover WA plans complete roof replacements for Perth homes. The assessment looks beyond the sheets or tiles to the supporting condition, water-sealing details and project requirements before you receive clear options and a written quote.
- Complete tiled, metal and asbestos roof-replacement enquiries
- Roof cover, underlying condition and water-sealing details considered
- Clear replacement options and a roof-specific written quote
Four details. No obligation. A real conversation about the roof.
FREE ROOF-SPECIFIC ASSESSMENT
Get clear on the right replacement
Start with your current roof. We’ll discuss the property and the most appropriate next step.
No obligation. We’ll use your details only to respond to this roofing enquiry. Marketing requires separate consent. Privacy Policy.
START WITH YOUR CURRENT ROOF
Which replacement path fits your home?
Select the roof you have now. This pre-fills the assessment form so the first conversation starts in the right place.
AGEING OR CORRODED METAL
Metal to new steel
Remove the old metal cover and specify the preparation, flashings, penetrations and drainage needed for the replacement.
KEEP THE TILED FINISH
Tile to new tile
Review tile type, roof layout, sarking, water-seal details and supporting components before a tile-to-tile replacement.
CONTROLLED SPECIALIST PATHWAY
Asbestos to new steel
Coordinate appropriately licensed asbestos-removal specialists where licensed removal is required, then plan the new roof scope.
THE WHOLE ROOF MATTERS
A new roof is only as good as the scope underneath it
Re-roofing should not be treated as a cosmetic sheet or tile swap. The existing roof was built in a particular era, with its own framing, water-shedding details and previous repairs. Those conditions affect the right replacement.
What is failing
- Material age and condition
- Leak and repair history
- Pitch, layout and drainage
What sits underneath
- Visible framing concerns
- Battens and supporting components
- Sarking and water-seal details
What the job requires
- Flashings and penetrations
- Access and site protection
- Approvals and specialist work where applicable
Requirements vary by project. Applicable approvals, engineering, insurance and licensed specialist work should be identified in the written scope.
WHEN REPEATED REPAIRS STOP MAKING SENSE
Signs the roof cover may be the bigger problem
No single sign proves you need a new roof. Several recurring issues across an ageing system justify a complete assessment.
Leaks return after previous work
Water reappears in the same area or starts showing elsewhere.
Tiles are fretting, cracking or hard to match
The material is failing across the roof rather than at one isolated point.
Metal sheets, fixings or flashings are corroding
Ageing details are no longer performing reliably as a system.
The roof line shows sagging or movement
Supporting components need review before a new cover is selected.
Fibre-cement sheets are deteriorating
Replacement needs a controlled specialist-removal pathway where required.
Renovations have left mixed materials and details
A planned replacement can resolve inconsistent interfaces across the property.
MAKE THE RIGHT DECISION FIRST
Repair, restore or replace?
One leak does not automatically mean a new roof. Repeated failures across an ageing roof are different. The assessment should identify whether the problem is isolated or the roof cover itself has become the weak point.
COMPAREREPAIRRESTORERE-ROOF
Best for
One isolated fault
A serviceable roof needing surface/component work
Ageing cover, recurring failures or a planned material change
Existing cover
Mostly retained
Retained
Removed and replaced
Underlying review
Local to the defect
Relevant service areas
Structure, support, water seal and interfaces considered
Typical outcome
Specific defect addressed
Existing system improved
A new replacement roofing system
ENOUGH TO MAKE THE NEXT STEP USEFUL
Get clear on the right roof-replacement path
Tell Roof Cover WA what is on the property now. The first conversation can focus on what is failing and what needs to happen next.
POPULAR PERTH RE-ROOFING PATH
Replacing old tiles with a modern steel roof
The value is not simply a new colour. The replacement has to suit the home, the roof geometry and the condition underneath.
- Existing tile condition and failure pattern
- Framing, battens, tie-downs and sarking
- New steel profile, visible finish and associated components
- Flashings, valleys, penetrations and drainage interfaces
WHAT HAPPENS NEXT
A controlled path from old roof to new roof
The process should make a major building decision feel understandable — not oversimplified.
Timing depends on size, roof type, access, structural work, approvals, product availability and weather. The programme is confirmed for the individual job.
- 01
Tell us about the roof
Choose the current roof type, then send your name, mobile and suburb.
- 02
Assess the property
Review the current roof, recurring problems, access and the relevant replacement paths.
- 03
Receive a written scope
See the proposed roof system, preparation, removals, inclusions, exclusions and known allowances.
- 04
Plan and complete the re-roof
Remove the old cover through the appropriate process, complete the agreed preparation and install the new system.
- 05
Clean-up and handover
Check agreed completion items and supply the project-specific handover and warranty information that applies.
PRICE NEEDS CONTEXT
Compare the whole scope — not only the bottom line
A useful re-roof quote explains what is being replaced, what supporting work is included, what could vary and what you receive at handover. That is why a reliable price cannot be reduced to one generic square-metre number.
What a clear quote should address
Removal and lawful disposal
New roof material, profile and finish
Battens, fixings and preparation
Sarking, insulation and ventilation
Valleys, flashings and penetrations
Structural work and known allowances
Access, scaffolding and site protection
Approvals and specialist work where applicable
Exclusions, variations, payment and programme
Written product and workmanship terms
A LOWER PRICE IS NOT A CLEARER JOB
What good re-roofing decisions should feel like
Calm, specific and accountable. The homeowner should not have to decode a vague quote or hope the difficult parts are someone else’s responsibility.
Assess before recommending
The right answer may be repair, restoration or replacement. The roof should lead the recommendation.
Explain it in plain English
You should understand what was found, the available paths and why a particular scope is recommended.
Identify requirements early
Applicable approvals, engineering, insurance and licensed specialist work belong in the planning conversation.
Put responsibility in writing
Inclusions, exclusions, known allowances and the variation process should be clear before commitment.
FINAL PRACTICAL QUESTIONS
Know what to ask before choosing a quote
Clear answers reduce the risk of comparing different scopes as if they are the same job.
How do I know whether my roof needs full replacement?
Repeated leaks, widespread tile fretting or breakage, corrosion across an old metal roof, deteriorated fibre-cement sheets, failing water-seal details or structural concerns may indicate a broader problem. One symptom alone is not a diagnosis, so the roof should be assessed before replacement is recommended.
How much does re-roofing cost in Perth?
Cost depends on roof size, pitch, access, existing material, the selected replacement system, structural preparation, flashings, sarking, insulation, scaffolding, disposal, approvals and specialist work. A roof-specific written quote is more reliable than a generic square-metre figure.
How long does a roof replacement take?
Timing varies with the property, roof size, material, access, structural work, approvals, product availability and weather. The expected programme should be confirmed for the individual project before work begins.
Can I stay in my home during re-roofing?
Many homeowners can remain in the property during standard re-roofing, but access, noise, safety zones, services and the removal method affect what is practical. Asbestos and complex structural work may require additional controls.
How is the house protected from rain while the old roof is removed?
The work sequence and temporary protection approach depend on the roof and forecast conditions. The project plan should explain how exposure is minimised and what happens if weather interrupts the work.
Can I replace an old tile roof with a steel roof?
A tile-to-steel conversion is possible for many Perth homes, but the existing structure, battens, tie-downs, pitch, sarking, flashings and drainage details must be assessed before the proposed system is confirmed.
Can Roof Cover WA replace a tiled roof with new tiles?
The current Roof Cover WA service range includes tile-to-tile roof replacement. The assessment reviews the tile type, roof design, layout, sarking, water-seal issues and supporting condition before a scope is recommended.
What happens if structural issues are found?
Known concerns should be documented and included or allowed for in the quote. More complex roof-frame issues may require engineering, approval or additional building work. The written scope should explain responsibility, allowances and the variation process.
Does my re-roof need a building permit or registered contractor?
Requirements depend on the scope, value, location and whether a permit is required. The approvals, contractor requirements, insurance and certification that apply should be identified for the individual project rather than treated as a blanket rule.
Can Roof Cover WA replace an asbestos roof?
Roof Cover WA coordinates with appropriately licensed asbestos-removal specialists where licensed removal is required. The actual licence holder and delivery process should be confirmed for the individual project before work begins.
What should be included in my re-roof quote?
The quote should identify removal, disposal, the new roof specification, preparation, supporting work, sarking or insulation, flashings, drainage, access and safety, approvals, engineering, asbestos requirements, exclusions, variations, payment schedule, programme and written warranty terms.
What warranty information should I receive?
Product and workmanship coverage can differ across materials, coatings and components. The exact terms that apply to the selected roof system should be supplied in writing before you commit.
Which Perth suburbs does Roof Cover WA service?
Enter the property suburb in the first form. Roof Cover WA will confirm availability for the location during the response.
What happens after I request an assessment?
Roof Cover WA contacts you to discuss the roof and confirm the appropriate next step. Depending on the job, this may include photos, property details and an on-site assessment before the written scope and quote are prepared.
Will hidden work automatically become a variation?
Known concerns and reasonable allowances should be documented before work begins. The quote should explain what is included, what remains unknown and how any variation would be discussed and approved.
YOUR NEXT STEP
Get clear on your Perth roof replacement
Request a no-obligation assessment and discuss the right replacement path for your tiled, metal or fibre-cement roof.
- Start with four details
- No generic square-metre promise
- Written scope based on the actual roof
FREE ROOF-SPECIFIC ASSESSMENT
Get clear on the right replacement
Start with your current roof. We’ll discuss the property and the most appropriate next step.
No obligation. We’ll use your details only to respond to this roofing enquiry. Marketing requires separate consent. Privacy Policy.